Paper and Fibre Science and Technology

   Warren Batchelor, Australian Pulp and Paper Institute, Monash University

[ Home ] [ Up ]

Sonya Rand- "Linting of Filler in the Offset Printing Process"

• Sonya investigated several techniques for measuring filler content in the paper surface.  The most reliable technique was found to be Backscatter SEM.   No strong correlation between surface filler content and lint in offset printing was found.
• Masters of Engineering Science Minor thesis Accepted May 2004.
• This web version doesn't include several minor corrections recommended by the examiners.

Chapter 1- Introduction and Chapter 2- Literature Review

Chapter 3- Experimental method

This is the main chapter.  Sonya evaluated a number of methods for measuring the filler content on the paper surface.  These methods are trialled, evaluated and discussed in this chapter.

Chapter 4-Results and Conclusions, Recommendations for further work, References and Appendices.

or download the Whole thesis.

Australian Pulp and Paper Institute

My CV-Departmental Web Page

This is a personal page maintained by the author (Monash Disclaimer).  Comments, criticisms and suggestions welcome- Contact me.    Last  updated 22/06/2009