| ID | 23 |
| ObsID | 30078-01-01-00R |
| UT | 1998 Jan 30 20:54:16 |
| MJD | 50843.871020 |
| flag1 | h |
No plot available
Flag values indicates a range of potential analysis issues, as follows:
- The burst was observed during a slew, and thus offsetfrom the source position.
- The observation was offset from the source position. In cases (a) and (b) we scaled the flux and fluence by the mean
collimator response appropriate for the position of the source in the field of view, as described in Appendix B.
- The origin of the burst is uncertain; the burst may have been from another source in the field of view (we rescaled the flux and fluence, if necessary, based on the assumed origin).
- Buffer overruns (or some other instrumental effect) caused gaps in the high time resolution data.
- The burst was so faint that only the peak flux could be measured, and not the fluence or other parameters.
- An extremely faint burst or possibly problems with the background subtraction, resulting in no fit results.
- The full burst profile was not observed, so that the event can be considered an unconfirmed burst candidate. Typically in these cases the initial burst rise is missed, so that the measured peak flux and fluence are lower limits only.
- High time resolution data modes did not cover the burst.