Recent Publications

PUBLICATIONS IN ISI JOURNALS:

A.H. Shamdani, and S. Khoddam, Mechanical and microstructural characterization of aluminium 6061 processed by plane stress local torsion, Metallurgical and Materials Transactions A 2013, E-SYMP-13-188-B (Accepted)

F. Rajabi, A. Zarei-Hanzaki, M. Eskandari, and S. Khoddam, The effects of rolling parameters on the mechanical behavior of 6061 aluminum alloy, Materials Science and Engineering: A, (DOI: 10.1016/j.msea.2013.04.023, 2013)

A. Farhoumand, P.D. Hodgson, S. Khoddam, and X.Y. Fang, Multiple Pass Axi-symmetrical Forward Spiral Extrusion of Interstitial-Free (IF) Steel, Mater. Sci. Eng., A, 2013, DOI: 10.1016/j.msea.2013.05.034.

S. Khoddam, and A.H. Shamdani, An Experimental-Finite Element Analysis of the Plane Stress Local Torsion, Journal of Materials Science, 2013, DOI: 10.1007/s10853-013-7352-3.

T. Sapanathan, S. Khoddam, and S.H. Zahiri, Spiral extrusion of aluminum/copper composite for future manufacturing of hybrid rods: A study of bond strength and interfacial characteristics, Journal of Alloys and Compounds, 2013, 571(0), p. 85-92

A. Farhoumand, P.D. Hodgson, and S. Khoddam, Finite element analysis of plastic deformation in variable lead axisymmetric forward spiral extrusion, Journal of Materials Science, 2013, 48(6), p. 2454-2461

M.B. Kannan, R.K.S. Raman, S. Khoddam, and S. Liyanaarachchi, Corrosion behavior of twinning-induced plasticity (TWIP) steel, Mater. Corros., 2013, 64(3), p. 231-235.

R.K. Singh Raman, M. Khalissi, and S. Khoddam, Twinning-assisted Environmental Cracking: A New Fracture Mechanism for the Crash-resistant Novel TWIP Alloys, Scripta Materialia, 2012, 67(12): 943-946.

A. Farhoumand, S. Khoddam, and P.D. Hodgson, A study of plastic deformation during axisymmetric forward spiral extrusion and its subsequent mechanical property changes, Modelling and Simulation in Materials Science and Engineering, 2012, 20(8).

Khoddam, S., Farhoumand, A., Hodgson, P.D., 2012. A kinematics study of variable lead axisymmetric forward spiral extrusion. Mater. Sci. Eng. A, 550(0), p. 167-175.

Shamdani, A.H. and Khoddam, S. A combined Upper Bound and Elastic-Plastic Finite Element Solution for a Fastener Hole Subjected to Internal Torsion, ARCH APPL MECH, 2012, 82(4), p. 445-459

Shamdani, A.H. and Khoddam, S., A Computer Aided Specimen Design to Induce Shearing Strain around a Hole, J MECH ENG SCI, 2012, 226(12), p. 2837-2851.

Shamdani, A.H., and Khoddam, S., A comparative analytical study of combined cold expansion and local torsion on fastener holes, Fatigue Fract. Eng. Mater. Struct., 2012, 82(4), p. 445-459.

Shamdani, A.H., Khoddam S., Thomson P.F., and Dehghan-Manshadi A., Microstructure and mechanical properties of IF steel deformed during plane stress local torsion, Journal of Materials Science, 2012, 47(3), p. 1582-1587.

Hajkazemi, J., Zarei-Hanzaki, A., Sabet, M., Khoddam, S., 2011. Double-hit compression behavior of TWIP steels. Mater. Sci. Eng., A 530, 233-238.

Khoddam, S. Farhoumand, A. Hodgson, PD. Axi-symmetric forward spiral extrusion; a kinematic and experimental study. Materials Science and Engineering: A. 2011;528:1023-9

Khoddam, S. Farhoumand, A. Hodgson, PD. Upper-bound analysis of axi-symmetric forward spiral extrusion. Mech Mater. 2011; 43(11), p. 684-692.

Abedi, H.R. Zarei-Hanzaki, A.and Khoddam, S. Effect of gamma precipitates on the cavitation behavior of wrought AZ31 magnesium alloy, Mater. Des., 2011, 32(4), p. 2181-2190

Khoddam, S. Hodgson PD, Bahramabadi MJ. An inverse thermal-mechanical analysis of the hot torsion test for calibrating the constitutive parameters. Mater. Des. 2011; 32:1903-9

Farhoumand, A. Hodgson, P.D. and Khoddam, S. Deformation behaviour in axi-symmetric forward spiral extrusion, finite element analysis and experimental procedure, Materials Science Forum, 2011, 690 (Light Metals Technology V), p. 173-176

Khalissi, M, Singh Raman R.K., and Khoddam, S. Stress corrosion cracking of novel steels for automotive applications, Procedia Engineering, 2011, 10, p. 1-10

Khoddam, S. Hodgson PD. Post processing of the hot torsion test results using a multi-dimensional modelling approach. Mater. Des. 2010; 31, p. 2578–84

Khoddam, S. Hodgson PD. A heuristic model selection scheme for representing hot flow data using the hot torsion test results. Materials and Design. 2010; 31(4):2011-7.

Mirzakhani, B. Khoddam, S. Arabi H, Salehi MT, Seyedein SH, Aboutalebi MR. Influence of specimen geometry of hot torsion test on temperature distribution during reheating treatment of API-X70. Journal of Iron and Steel Research, International. 2010;17:34-9.

Mirzakhani B, Arabi H, Salehi MT, Khoddam, S. Seyedein SH, Aboutalebi MR. Investigation of dynamic and static recrystallization behavior during thermomechanical processing in API-X70 microalloyed steel. Journal of Materials Engineering and Performance. 2009:1-6.

Mirzakhani, B. Khoddam, S. et. al., A coupled thermal-mechanical FE model of flow localization during the hot torsion test, steel research int. 80 (2009) No. 11, pp. 846-854.

Sabet, M., Zarei-Hanzaki, A. and Khoddam, S., Dynamic restoration processes in High-Mn TWIP steel, Engineering Materials and Technology, October 2009, Vol. 131, p. 0445021-0445025. (2009).

Mirzakhani, M. Salehi M. and Khoddam, S., Investigation of Dynamic and Static Recrystallization Behavior during themomechanical processing in a Microalloyed steel, J. Mat. Eng. and Performance, 2009, 18(8), p. 1029-1034.

Mirzakhani B, Salehi M, Arabi H, Khoddam S, Seyedein SH, Aboutalebi MR. Prediction of Temperature Distribution in the Hot Torsion Test Specimen. IUST International Journal of Engineering Science. 2008; 19(5-1):45-50.

Kannan, B. M., Singh, R. and Khoddam, S. , Comparative studies on the corrosion properties of a Fe–Mn–Al–Si steel and interstitial-free steel, Corrosion Science, 50 pp. 2879–2884. (2008)

Hakkak, F., Khoddam, S., On Calculation of Preliminary Design Parameters for Lenticular Boom, Journal of Aerospace Engineering, Proc. IMechE, Vol. 221 Part G, pp. 377-384. (2007)

Ebrahimi, G., Zarei-Hanzaki, A., and Khoddam, S., The effects of thermo-mechanical processing parameters on the warm workability of 2024 al-alloy, international journal of engineering science (Persian) 2007, 18(4 (supplement of metallurgy and materials engineering)), p. 25-30.

Khoddam, S., Variations of effective length of the hot torsion test specimen with deformation, Journal of Materials Processing and Technology, 177, pp. 465-468 (2006).

PUBLICATIONS IN PEER REVIEWED CONFERENCES:

N. M. Muthu, Falzon, B. G., S. Maiti, S. Khoddam, Transverse crack propagation in fibre- reinforced composites using element-free Galerkin Method, 19th International Conference on Composite Material (ICCM19, ConfSys) 2013, July 28-August 3rd Montreal, Canada.

A.H. Shamdani, S. Khoddam, P.J. Mutton, and P.V. Sivaprasad, A Comparative Study of on the Deformation Behaviour of Different Grades of Rail Steel Using Novel Mechanical Testing, 10th International Heavy Haul Association Conference, Capacity building through heavy haul operations, IHHA 2013, 2013.

M. Khalissi, R.K.S. Raman, S. Khoddam, and X.-Y. Fang, Stress Corrosion Cracking of a Twinning Induced Plasticity (TWIP) Steel, Corrosion and Pervention 2012, I. Godson Ed., 11-14 Nov. 2012, (Melbourne).

A.H. Shamdani, and S. Khoddam, The influence of plane stress local torsion on aluminium 6061, 15th International Conference on Advances in Materials and Processing Technologies, A.K. Tieu Ed., 2012.

Chalay-Amoly, A. Zarei-Hanzaki, S. Khoddam, S.M. Fatemi-Varzaneh, P. Changizian,  Dynamic recrystallization mechanism in as-cast AZ91 magnesium alloy severely deformed by backward extrusion process, 3rd International Conference on Ultrafine Grained & Nano-Structured Materials (UFGNSM), November 2011, University of Tehran, Tehran, Iran.

M. Khalissi, R.K. Singh Raman, and S. Khoddam, Stress corrosion cracking of novel steels for automotive applications, 11th international conference on the mechanical behaviour of materials, 5-9 June, Milano, Italy, ICM, 2011.

D. Mason, E. Ozberk, RK. Singh Raman, S. Khoddam, S. Al Saadi and H. Beladi, Corrosion resistance of nanobainitic steel, Corrosion & Protection 2010. Adelaide Convention Centre, p. 1-6.

Mirzakhni, B., Khoddam, S. et. al. Mathematical Modeling of Flow Behaviour of API-X70 during Hot Torsion Testing, International Conference on Advances in Materials and Processing Technologies (AMPT) 26 - 29 October 2009.

J. Hajkazemi, A. Zarei-Hanzaki, S. Khoddam, The Effect of Twinning on Static Restoration Processes of TWIP Steels, proceeding of 11th Iranian Steel Symposium, 2008, Ahvaz, Iran (in Persian).

Sabet, M., Zarei-Hanzaki, A. and Khoddam, S. An investigation to the hot deformation behavior of high-Mn TWIP steels, 3rd Int. Conf. on Thermomechanical processing of steels, 10-12 Sept. 2008, Italy.

Mathan, B. K., Singh, R. R. K., Khoddam, S., 2008, Polarisation Behavior of Twinning Induced Plasticty (TWIP) Steel, Proceeding of Corrosion and Prevention 08, 16-19 November 2008, Australiasian Corrosion Associate, Kerrimuir, Victoria, pp. 01-04.

Abdolahi, T. , Khoddam, S., Modelling an attitude Control system for a gravity gradient stabilized satellite for assessing required conditions for proper deployment of its boom, 15th Int. Mech. Eng. Conf. (ISME2007), Amirkabir University.

J. Hajkazemi, A. Zarei-Hanzaki, S. Khoddam, The Effect of Temperature on Static Restoration Processes of TWIP Steels, proceeding of 10th Iranian Steel Symposium, 2007, Persian Gulf Mining & Metal Industries Special Zone, Bandar Abbas, Iran (in Persian).

Abdolahi, T., Khoddam, S., Feasibility study and comparison on methods for recovery of a capsized Gravity gradient stabilized satellite using retractable and simple boom, 15th Int. Mech. Eng. Conf. (ISME2007), Amirkabir University.

Mirshams, M., S. Khoddam, et al. (2007). Calculating average deployment speed of a STEM gravity gradient boom, AERO2007, KNT University.

Mirshams, M., Irani, S., Khoddam, S. and Rezaeii, M. (2007), Correlation between final deployment speed of a gravity gradient boom with its design parameters  6th National Aerospace Conference, KNT University, March 2007

Abdolahi, T., Khoddam, S. (2007), Modelling of atmospheric flows on attitude reduction rate and Kepler parameters of a LEO satellite The 6th National Aerospace Conference, KNT University, March 2007

Patent :

Electro-optic coordinates and velocity measurement with laser, IROST, April, 2004

Materials processing, optimization and multidisciplinary modeling

Researcher ID: F-8720-2010