| |
Paper microfluidic diagnostics and analytical chemistry
|
|
X. Li, J. Tian, W. Shen
"Progress in patterned paper sizing for fabrication of paper-based
microfluidic sensors", Cellulose, In press, (DOI:
10.1007/s10570-010-9401-2) |
|
|
X. Li, J. Tian, W. Shen
"Thread as a versatile material for low-cost microfluidic diagnostics",
ACS Applied Materials and Interfaces, 2 (2010) 1-6 |
|
|
X.
Li, J. Tian, G. Garnier, W. Shen "Fabrication of paper-based
microfluidic sensors by printing", Colloids and Surfaces B:
Biointerfaces, In press, (DOI: 10.1016/j.colsurfb.2009.12.023)
|
|
|
X. Li, J. Tian, T.
Nguyen, W. Shen "Paper-based microfluidic systems by plasma treatment",
Analytical Chemistry, 80 (2008) 9131-9134 |
|
|
X. Li, J. Tian, W. Shen "Quantitative
biomarker assay with microfluidic paper-based analytical devices", Anal.
Bioanal. Chem, 396, (2010), 495-501
|
|
|
X. Li, J. Tian, W. Shen,
"Paper-based diagnostic and environmental sensors", APPITA Conference
Proceedings, April 20-22, (2009), Melbourne, Australia. p.267-271 |
Tissue engineering and biofunctional printing
|
|
M. Khan, D. Fon, X. Li,
J. Tian, J. Forsythe, G. Garnier and W. Shen, "Biosurface engineering
through ink jet printing", Colloids and Surfaces B: Biointerfaces, 75
(2010) 441-447 |
|
|
M.
Khan, X. Li, W. Shen and G. Garnier "Thermal stability of bioactive
enzymatic papers", Colloids and Surfaces B: Biointerfaces, 75 (2010)
239-246. |
|
|
M. Khan, X. Li, W. Shen and G. Garnier "Thermal stability of bioactive
enzymatic papers", Colloids and Surfaces B: Biointerfaces,
(doi:10.1016/j.colsurfb.2009.08.042). |
|
|
M. Khan, D. Kannangara, W. Shen and G. Garnier, "Isothermal
Non-Coalescence of Liquid Droplets at the Air-Liquid Interface", Langmuir,
24 (2008) 3199-3204 |
|
|
D.R. Nisbet, A.E. Rodda, D.I. Finkelstein, M.K. Horne, J.S. Forsythe and
W. Shen, "Characterization of eletrospun membranes: problems and
improvements", Colloids and Surfaces B: Biointerfaces, 71 (2009) 1-12 |
|
|
D.R. Nisbet, W. Shen, D.I. Finkelstein, M.K. Horne, J.S. Forsythe,
"A
review of the cellular response on electrospun nanofibers for tissue
engineering" Journal of Biomaterials Applications, 24 (2009) 7 - 29 |
|
|
D.R. Nisbet, S. Pattanawong, N.E. Ritchie, W. Shen, D.I. Finkelstein,
M.K. Horne, J.S. Forsythe, "Interaction of embryonic cortical neurones on
nanofibrous scaffolds for neural tissue engineering", Journal of Neural
Engineering, 4 (2007) 35-41 |
|
|
D.R. Nisbet, S. Pattanawong, N.E. Ritchie, W. Shen, D.I. Finkelstein,
M.K. Horne, J.S. Forsythe, The effect of surface hydrophilicity on the
behavior of embryonic cortical neurons, Journal of Colloid and Interface
Science 299, 647 - 655 (2006) |
|
|
M. Khan, D. Fon, X. Li, J. Forsythe, G. Thouas, G. Garnier, W. Shen,
"Printing Biomolecules part-1: Achieving total control of biomolecule
delivery using ink-jet printing", CHEMECA 2008. pp. 744 - 75 |
|
|
M. Khan, J. Tian, X. Li, W. Shen, G. Garnier, "Biofunctional surfaces
through paper and printing", The XIVth Pulp and Paper Fundamental Research
Symposium, Oxford, UK. (Accepted) |
|
|
M. Khan, W. Shen and G. Garnier, "Thermal stability of horseradish
peroxidase enzymatic papers", APPITA Conference Proceedings, April 20-22,
2009, Melbourne, Australia. p.273-280 |
|
|
M.S. Khan, D. Fon, X. Li, J. Forsythe, G. Garnier and W. Shen.
"Ink jet
printing of biomolecules on porous surfaces". Proceedings of the
International Conference on Chemical Engineering (ICChE), 29-30 Dec.
Dhaka, Bangladesh, (2008). P. 171-176 |
Printing science, ink transfer fundamentals and ink paper interaction
|
|
J. Tian, Y. Mao and W. Shen, "Ink Transfer and Refusal Mechanisms in
Waterless Offset Printing", Journal of adhesion science and technology, 23
(2009) 281-296 |
|
|
J. Tian, F. Liu and W. Shen, "Ink Transfer and Refusal Mechanisms in
Lithographic Offset Printing and the Measurement of the Splitting Force of
Fountain Solution Film", Appita Journal, 62(3) (2009)188-193 |
|
|
W. Shen, Y. Mao, G. Murray and J. Tian, "Adhesion and anti-adhesion of
viscous fluids on solid surfaces-A study of ink transfer mechanism in
waterless offset printing", Journal of Colloid and Interface Science, 318
(2008) 348-357 |
|
|
F. Liu and W. Shen, "Forced wetting and dewetting and their roles in
offset printing", Colloids and Surfaces A, 316 (2008) 62-69 |
|
|
F. Liu, I. Parker and W. Shen, "Ink-Fountain Solution Emulsion in Offset
Printing Studied Using Confocal Microscopy". Appita Journal, 61(6) (2008)
461-467 |
|
|
F. Liu, I. Parker and W. Shen, "The Distribution of Ink Emulsion
Components in Papers of Different Surface Energy", Journal of Pulp and Paper
Science, 34 (1) (2008) 51 - 59 |
|
|
D. Kannangara, H. Zhang and W. Shen, "Liquid-paper interactions during
liquid drop impact and recoil on paper surfaces", Colloids and Surfaces A,
280, 203-215 (2006) |
|
|
W. Shen, B. Hutton and F. Liu, "A new understanding on the mechanism of
fountain solution in the prevention of ink transfer to the non-image area in
conventional offset lithography", Journal of Adhesion Science and
Technology, 18(15/16), 1861 (2004) |
|
|
J. Tian, F. Liu and W. Shen, "Fundamental aspects of ink transfer in
offset lithography", Proceedings of 2nd International Papermaking and
Environmental Conference, Tianjin, China, (May, 2008) (Keynote) |
|
|
D. Kannangara, M. Khan, W. Shen, "The inertial effects on the capillary
slow in surface grooves". CHEMECA (2008), pp. 865-875 |
|
|
D. Kannangara, M.S. Khan, W. Shen "An analysis of effects of internal
sizing on ink jet printing quality", 63rd APPITA Conference Proceedings,
April 20-22, (2009), Melbourne, Australia. p.195-202 |
Surface engineering in wetting, pharmaceutical and adhesion application
|
|
T. Nguyen, N. Eshtiaghi, K. Hapgood and W. Shen, "An analysis of the
thermodynamic conditions for solid powder particles spreading over liquid
surface", under review |
|
|
N. Eshtiaghi, J. S. Liu, W. Shen, K. P. Hapgood, "Liquid marble
formation: spreading coefficients or kinetic energy?" Powder Technol. (DOI:
10.1016/j.powtec.2009.07.002) |
|
|
K.P. Hapgood, T.N. Nguyen, Sunarko, S.M. Iveson and W. Shen,
"Rewetting
effects and drop motion on partially wetted powder surfaces". AIChE Journal,
55 (2009) 1402-1415 |
|
|
J. Tian, L. Wang, M. Hudry-Clergeon and W. Shen, "An experimental method
for measuring the spreading velocity of surface active substances on thin
films of liquid substrate". Chemical Engineering Science, 64 (2009) 3311 -
3319 |
|
|
G. Murray, K. Stack, D. McLean, W. Shen and C. Garnier,
"Dynamics of
pitch colloid adsorption a the solid-liquid interface by surface plasmon
resonance", Colloids and Surfaces, A, 341 (2009) 127-133 |
|
|
Y.B. Truong, L.I. Kyratzis, W. Shen, "Fabrication and characterization
of electrospun PVDF-aliquat 336 fibre membrane forremoval of Cadmium from
hydrochloric acid solutions", Journal of Material Science, 44 (2009)
1101-1106 |
|
|
D. Kannangara, W. Shen, "Roughness Effects of Cellulose and Paper
Substrates on Water Drop Impact and Recoil", Colloids and Surfaces A, 330
(2008) 151-160 |
|
|
K.P. Hapgood, W. Shen, S.M. Iveson, Sunarko and T.H. Nguyen,
"Drop
motion on partially wetted powder surfaces", Proceedings of CHEMECA, Sept.
(2007) pp. 460 |
|
|
T.N. Nguyen, Sunarko, S.M. Iveson, W. Shen and K. Hapgood,
"Rewetting
effects and drop motion in wet granulation", 9th International symposium on
agglomeration and 4th international granulation workshop, 26-26 June,
2009, Sheffield, UK. |
Cellulose fibre surface chemistry, paper sizing and superhydrophobicity
|
|
H. Zhang, D. Kannangara, M. Hilder, R. Ettl and W. Shen,
"The role of
vapour deposition in the hydrophobization treatment of cellulose fibres
using alkyl ketene dimers and alkenyl succinic acid anhydrides", Colloids
and Surfaces A, 297 (2007) 203-210 |
|
|
M. Hudry-Clergeon1, S. Champ and W. Shen, "Spreading of AKD and ASA on
Wet Paper during the Curing Phase of Paper Sizing", Proceedings of 2nd
International Papermaking and Environmental Conference, Tianjin, China,
(May, 2008) |
|
|
W. Shen, H. Zhang and R. Ettl, "Chemical composition of
"AKD vapour" and
its implication to AKD vapour sizing", Cellulose, 12, (2005) 641-652 |
Patents
|
|
Shen, W.; Tian, J.;
Li, X. "Printed multi-zone microzone plates" Australian Provisional
Patent filed on 12 February 2010, No. pending |
|
|
Shen, W.; Li, X. ; Tian, J. "Three
dimensional microfluidic systems" Australian Provisional Patent No.
2009903382, 20 July, 2009
|
|
|
Shen, W.; Tian, J.; Li,
X. Khan, M.S. Garnier, G., "Method of fabricating microfluidic systems"
PCT/AU2009/000889, 10 July, 2009 |
|
|
Shen, W.; Li, X. Tian,
J. Nguyen, T.; Garnier, G. "Switches for microfluidic systems"
PCT/AU2009/001009, 10 August, 2009 |
|
|
Shen, W., Li, X. Tian, J.
Garnier, G. "Quantitative and self-calibrating chemical analysis using
paper-based microfluidic sensors", Australian Provisional Patent, No.
2009903024, 30 June, 2009. |
|
|
Shen, W.; Tian, J.; Li,
X.; Garnier, G. "Patterned paper as Microfluidic system", Australian
Provisional Patent, No. 2008903553, 11 July, 2008 |
|