|
|
|
Above is the Circuitmate Multimeters. Please remember to set the appropriate
range when measuring voltage, resistance or current.
Note: DM10 (on your left) has maximum input current of 200mA only while
DM15B can take 2A. Use the Fluke if you need to measure higher current.
Using these two multimeters should be straight forward, select the function
of measurement turning the dial into a desired selection.
Note:One of the Circuitmate, that is the DM15B, there is an AC/DC switch on the top left corner (below the LCD display). Select AC if you work in AC or DC if you work in DC. Incorrect selection of this switch will lead to errors in your experiment results.
Go back to previous page